USAfixTM - Repair Guide (RG) - Master

Email RG

- Check and clean the filter

Level of Difficulty - LOW	Estimated Completion Time - 5 minutes
TASKI - Jet 38
	Tools Required
	Parts Required

Step   Procedure & Parts & Tools 1 LOCATE THE BRUSH MOTOR FILTER CAGE ON THE BOTTOM BACK OF THE VAC. PUSH DOWN ON THE LATCH TO IT. 2 VISUALLY INSPECT THE BRUSH MOTOR FILTER FOR DAMAGE SUCH AS WEAR AND/OR TEAR. 3 PULL THE FILTER OUT OF CAGE. SHAKE THE FOAM FILTER TO REMOVE DUST AND DEBRIS. YOU MANY ALSO CLEAN FILTER WITH WATER. RINSE THE FILTER UNDER WATER AND LAY FLAT TO DRY. REPLACE THE CLEAN FILTER AND CLOSE THE CAGE.